B2313
Glass Position Initialization Incomplete
B2313 is an OBD-II diagnostic trouble code meaning: Glass Position Initialization Incomplete. Common causes: broken power supply or signal wires, glass position sensor malfunction. Estimated repair cost: $6–56.
Symptoms
- Automatic window functions do not work
- Intermittent glass movement
- The glass does not reach the top/bottom stop
- Fault indication on the instrument panel
Causes
- Broken power supply or signal wires
- Glass position sensor malfunction
- Mechanical obstacles in the guides
- Control unit software failure
- Low battery voltage
How to Fix
- Check battery voltage (min. 12.4V)
- Perform manual glass initialization according to the manual (usually: 1. Fully lower the glass, 2. Raise it, holding the button for 5 seconds after reaching the stop)
- Check wiring harness for damage
- Scan the control unit for additional errors
- If necessary, replace the position sensor or window lift motor
Related codes
FAQ
What does the B2313 code mean?
B2313 is an OBD-II diagnostic trouble code that indicates: Glass Position Initialization Incomplete
What causes a B2313 error code?
The most common causes of B2313 include: Broken power supply or signal wires; Glass position sensor malfunction; Mechanical obstacles in the guides; Control unit software failure.
How do I fix a B2313 diagnostic trouble code?
To fix B2313: Check battery voltage (min. 12.4V). Perform manual glass initialization according to the manual (usually: 1. Fully lower the glass, 2. Raise it, holding the button for 5 seconds after reaching the stop). Check wiring harness for damage. For a complete diagnosis, use an OBD-II scanner.
Is it safe to drive with B2313?
Yes, but get it checked soon
How much does it cost to fix B2313?
The estimated repair cost for B2313 is $6–56. Actual cost depends on your vehicle, location, and labor rates.
See also: Russian version · NationStat