OBD Guide
ENFRDEESPT

C12B6

ABS High Pressure Accumulator Pressure Sensor Circuit Open Or Short To Ground

C12B6 is an OBD-II diagnostic trouble code meaning: ABS High Pressure Accumulator Pressure Sensor Circuit Open Or Short To Ground. Common causes: damage to the accumulator pressure sensor wiring, open circuit or short circuit in the wiring harness to ground. Estimated repair cost: $11–133.

Severity
🚨 Critical
Can you drive?
Do not drive — repair immediately
Approx. repair cost
$11–133 (est.)

Symptoms

  • ABS, ESP or brake system indicator is on (red)
  • Disabling ABS and ESP
  • Possible sudden tightening or weakening of the brake pedal
  • Code C12B6 during diagnosis
  • ABS pump running noise (constant or absent)

Causes

  • Damage to the accumulator pressure sensor wiring
  • Open circuit or short circuit in the wiring harness to ground
  • Faulty pressure sensor (internal break)
  • Corrosion or oxidation in the sensor connector
  • ABS control unit malfunction

How to Fix

  1. Read error codes with a scanner, check for related codes
  2. Check the accumulator pressure sensor connector for damage and oxidation.
  3. Measure the resistance of the sensor circuit with a multimeter between the corresponding terminals of the connector
  4. Check the sensor wires for opens and shorts to the body
  5. Check the pressure in the accumulator (if there is a corresponding function in the scanner)
  6. Replace the pressure sensor or restore the wiring if a fault is detected

Related codes

C1281C1085C1200C1166

FAQ

What does the C12B6 code mean?

C12B6 is an OBD-II diagnostic trouble code that indicates: ABS High Pressure Accumulator Pressure Sensor Circuit Open Or Short To Ground

What causes a C12B6 error code?

The most common causes of C12B6 include: Damage to the accumulator pressure sensor wiring; Open circuit or short circuit in the wiring harness to ground; Faulty pressure sensor (internal break); Corrosion or oxidation in the sensor connector.

How do I fix a C12B6 diagnostic trouble code?

To fix C12B6: Read error codes with a scanner, check for related codes. Check the accumulator pressure sensor connector for damage and oxidation.. Measure the resistance of the sensor circuit with a multimeter between the corresponding terminals of the connector. For a complete diagnosis, use an OBD-II scanner.

Is it safe to drive with C12B6?

Do not drive — repair immediately

How much does it cost to fix C12B6?

The estimated repair cost for C12B6 is $11–133. Actual cost depends on your vehicle, location, and labor rates.

FRDEESPT

See also: Russian version · NationStat