Error P0120 on JAC все модели

Symptoms

• Unstable idle speed
• Poor responsiveness to the gas pedal
• Jerks and dips during acceleration
• The engine may stall at idle speed
• Enabling Limp Mode
• Increased fuel consumption
• Check Engine Light Is On

Causes

• Faulty throttle position sensor
• Open or short circuit in TPS wiring
• Oxidation or corrosion of connector contacts
• Mechanical damage to the throttle assembly
• Throttle valve contamination
• Engine ECU malfunction
• Calibration failure after replacing components

How to Fix

1. Connect a diagnostic scanner and read all error codes
2. Check the supply voltage at the TPS sensor (should be 5V)
3. Measure the resistance and voltage of the TPS signal at different throttle positions
4. Visually inspect wiring and connectors for damage
5. Clean the connector contacts and treat them with contact lubricant.
6. If necessary, replace the throttle position sensor
7. Clean the throttle assembly from carbon deposits and dirt
8. Perform adaptation or calibration of the throttle assembly
9. Clear error codes and test drive

FAQ

Error P0120 on other vehicles