Error P0227 on SWM все модели
Throttle/Pedal Position Sensor/Switch C Circuit Low
Code
P0227
Vehicle
SWM все модели
Category
Powertrain
Severity
🔴 HighSymptoms
- Switching to emergency mode
- Dips and jerks when pressing the gas pedal
- High or unstable idle speed
- Check Engine Light Illuminates
- Maximum speed limit
Causes
- Channel C signal wire short to ground
- Broken signal wire or power wire
- Sensor potentiometer wear
- No 5V reference voltage from ECU
- Damage to the sensor housing due to vibration or overheating
How to Fix
- Read codes and check for other pedal/throttle sensor errors
- Check the 5 V reference voltage at the sensor connector
- Measure the voltage of channel C signal when pressing the pedal
- Check the wiring harness for open circuit and short to ground.
- Clean the contacts of the sensor connector
- If necessary, replace the accelerator pedal position sensor or throttle valve
FAQ
Чем P0227 отличается от P0222?
P0222 — низкий сигнал канала B, P0227 — низкий сигнал канала C. Оба говорят о том же типе неисправности, но в разных каналах датчика.
Можно ли самостоятельно починить P0227?
Проверку проводов и разъёмов можно выполнить самостоятельно, но для точной диагностики рекомендуется использовать мотортестер.