OBD Guide

Error P038F on BMW все модели

Ignition J Control Signal Circuit High

Code
P038F
Vehicle
BMW все модели
Category
Powertrain
Severity
🔴 High

Symptoms

Causes

How to Fix

  1. Read codes, freeze frame data
  2. Disconnect the J coil connector, check if the voltage on the control wire disappears
  3. Check the control wire for short circuit to +12V (resistance between the control contact and the power supply plus)
  4. Inspect the wiring for pinching or touching hot surfaces (insulation melting)
  5. Check the resistance of the primary winding of coil J
  6. Replace the coil and/or eliminate the short circuit in the wiring

FAQ

Как быстро может повредиться ЭБУ при P038F?
При КЗ на питание в управляющей цепи перегрев транзистора ЭБУ может произойти за несколько минут. Рекомендуется немедленно заглушить двигатель.
Что проверить первым — катушку или проводку?
Сначала отключите разъём катушки. Если ошибка исчезает при включении зажигания без разъёма — неисправна катушка. Если нет — КЗ в проводке.

Error P038F on other vehicles