OBD Guide
ENFRDEESPT

P052D

Cold Start A Camshaft Position Timing Over-Retarded Bank 2

P052D is an OBD-II diagnostic trouble code meaning: Cold Start A Camshaft Position Timing Over-Retarded Bank 2. Common causes: dirty/worn vvt solenoid on bank 2, low oil pressure (inadequate viscosity, clogged filter). Estimated repair cost: $56–278.

Severity
⚠️ Medium
Can you drive?
Limited driving only, diagnose soon
Approx. repair cost
$56–278 (est.)

Symptoms

  • Unstable engine idling during cold start
  • Reduced power and throttle response
  • Increased fuel consumption
  • Possible popping noises in the exhaust system

Causes

  • Dirty/worn VVT solenoid on bank 2
  • Low oil pressure (inadequate viscosity, clogged filter)
  • Mechanical damage to the phase shifter
  • Malfunction of the camshaft position sensor (bank 2)
  • Problems with the VVT wiring harness or connectors
  • ECU software error (reflashing required)

How to Fix

  1. Check the level and condition of the engine oil (replace if necessary)
  2. Visually inspect the timing chain on bank 2
  3. Check resistance and operation of VVT solenoid
  4. Test camshaft position sensor (bank 2)
  5. Check oil pressure (especially during cold starts)
  6. Scan the system for related errors
  7. If necessary, replace the phase shifter or VVT solenoid

Related codes

P052CP0014P0016P0024

Error P052D by Vehicle Brand

AcuraAudiBAICBMWBYDBuickCadillacChanganCheryChevroletChryslerCitroenDodgeDongfengExeedFAWFordForthingFotonGACGMGMCGeelyGreat WallHavalHondaHongqiHyundaiInfinitiJACJaecooJaguarJeepJetourKaiyiKiaLadaLexusLi AutoLifanLincolnLivanMazdaMercedes-BenzMercuryMitsubishiNIONissanOldsmobileOmodaOpelPeugeotPlymouthPontiacRenaultSWMSaturnSkodaSkywellSubaruSuzukiTankToyotaVolkswagenVolvoVoyahXPengZeekrZotye

FAQ

What does the P052D code mean?

P052D is an OBD-II diagnostic trouble code that indicates: Cold Start A Camshaft Position Timing Over-Retarded Bank 2

What causes a P052D error code?

The most common causes of P052D include: Dirty/worn VVT solenoid on bank 2; Low oil pressure (inadequate viscosity, clogged filter); Mechanical damage to the phase shifter; Malfunction of the camshaft position sensor (bank 2).

How do I fix a P052D diagnostic trouble code?

To fix P052D: Check the level and condition of the engine oil (replace if necessary). Visually inspect the timing chain on bank 2. Check resistance and operation of VVT solenoid. For a complete diagnosis, use an OBD-II scanner.

Is it safe to drive with P052D?

Limited driving only, diagnose soon

How much does it cost to fix P052D?

The estimated repair cost for P052D is $56–278. Actual cost depends on your vehicle, location, and labor rates.

FRDEESPT

See also: Russian version · NationStat