Error P05F6 on Lexus все модели
Exhaust Aftertreatment Power Relay Control Circuit Stuck On
Code
P05F6
Vehicle
Lexus все модели
Category
Powertrain
Severity
⚠️ MediumSymptoms
- AdBlue/SCR system components operate when the ignition is switched off
- Battery drain overnight
- Check Engine Light Is On
- Overconsumption of AdBlue reagent
- Increased wear on the pump and system heaters
Causes
- Welded or stuck power relay contacts
- Contamination of relay contacts (arc wear)
- Poor quality relay with a defective contact group
- Long-term operation of the relay at high current (overload)
How to Fix
- Check the presence of voltage at the relay output with the ignition off
- Remove the aftertreatment system power relay - the components should stall.
- Measure the resistance between the contacts of the removed relay (welding - close to zero)
- Replace the aftertreatment system power relay
- After replacement, check the current consumption with the ignition off
- Make sure there are no other system codes
FAQ
Как убедиться, что реле сварилось?
Извлеките реле из блока. Проверьте мультиметром сопротивление между силовыми контактами. Если близко к нулю при снятой управляющей обмотке — контакты сварены.
Почему реле «сваривается»?
Это происходит при размыкании контактов под значительной токовой нагрузкой: дуга расплавляет материал контактов, они слипаются. Причина — перегруженная цепь или некачественное реле.