Error P0601 on Audi все модели
Lack of proper voltage to the PCM, Defective PCM memory module, Defective PCM ground circuit(s), Defective PCM controlled output devices
Code
P0601
Vehicle
Audi все модели
Category
Powertrain
Severity
🚨 CriticalSymptoms
- The engine does not start or is very unstable
- Many unrelated error codes at the same time
- Check Engine Light Is On
- Unstable operation of all ECU-controlled systems
- Inability to erase error after repair
Causes
- Damage to ECU memory due to incorrect flashing
- Voltage surge in the on-board network (short circuit, battery connection with incorrect polarity)
- Physical damage to the ECU memory chip
- Electrostatic discharge when working with the ECU
- Critical overheating of the ECU
How to Fix
- Check the supply voltage and quality of the ECU ground
- Try to reprogram (reflash) the ECU with official software
- Check the unit for signs of flooding, corrosion, overheating on the board
- If memory damage is confirmed, repair the ECU (chip resoldering) or replace
- After installing a new ECU, carry out adaptation and binding of the immobilizer
- Complete all necessary onboarding procedures at the dealer
FAQ
Можно ли самостоятельно перепрошить ЭБУ при P0601?
Перепрошивку ЭБУ следует доверять специалистам с официальным или проверенным программным обеспечением. Некорректная перепрошивка может окончательно вывести блок из строя.
Стоит ли ремонтировать или менять ЭБУ?
Ремонт (перепайка чипа памяти) дешевле в 3–5 раз. Однако качество ремонта зависит от квалификации мастера. Новый оригинальный блок надёжнее, но дороже.