Error P0603 on Chrysler все модели
Internal Control Module Keep Alive Memory (KAM) Error
Code
P0603
Vehicle
Chrysler все модели
Category
Powertrain
Severity
🔴 HighSymptoms
- Unstable engine operation immediately after starting (especially cold)
- Unstable idle before warming up
- The engine behaves like it was just trained every time
- Check Engine Light Is On
- Rich or lean mixture until adaptation is complete
Causes
- Physical damage to the EEPROM chip in the ECU
- Weak battery (KAM loses data when voltage is low)
- Poor contact in the ECU constant power supply circuit (+12V constant terminal)
- Unstable ECU ground
- Effect of electrostatic discharge on the ECU
How to Fix
- Check battery voltage and charge if necessary
- Check the constant power terminal of the ECU (should be 12V even with the ignition off)
- Check all ground points of the ECU for reliable contact.
- Try to reprogram the ECU with official software
- Diagnose the physical condition of the ECU for damage to the board
- Replace or repair the ECU (resoldering the EEPROM chip)
FAQ
Что хранится в памяти KAM ЭБУ?
KAM хранит данные адаптации: коэффициенты коррекции топливоподачи, результаты обучения холостого хода, настройки адаптации педали газа, данные каталитического нейтрализатора и другие параметры, накопленные за всё время эксплуатации.
Что происходит при стирании KAM при отключении аккумулятора?
Двигатель начинает работать с базовыми настройками, что проявляется в нестабильном холостом ходу, рывках и временном ухудшении экономичности до завершения цикла адаптации (обычно 20–50 км).