Error P0670 on JAC все модели
Glow Plug Control Module 1 Control Circuit/Open
Code
P0670
Vehicle
JAC все модели
Category
Powertrain
Severity
🔴 HighSymptoms
- Inability to start a diesel engine in cold weather
- The Check Engine light comes on
- Glow plug icon stays on or does not light up
- Excessive white smoke when trying to start in cold weather
- Unstable operation of the entire preheating system
Causes
- Open or damaged control circuit between the ECU and the GPCM module
- Oxidation or damage to the GPCM connector
- Glow Plug Control Module (GPCM) Malfunction
- No power or ground to GPCM
- Internal ECU fault
How to Fix
- Read error codes with an OBD-II scanner, record all active codes
- Inspect the GPCM module, wiring and connectors for damage, oxidation, breaks
- Check the supply voltage and ground circuit of the GPCM
- Check the control circuit between the ECU and GPCM with a multimeter for open and short circuits.
- Check the presence of a control signal from the ECU at the GPCM input
- If the circuit is working properly, replace the GPCM module; if the ECU is confirmed to be faulty, replace it
FAQ
Что такое модуль управления свечами накаливания (GPCM)?
GPCM (Glow Plug Control Module) — это электронный блок, который получает команды от ЭБУ и управляет питанием каждой свечи накаливания в дизельном двигателе. Он контролирует время прогрева и силу тока, защищая свечи от перегрева.
Насколько сложно заменить модуль GPCM?
Замена модуля GPCM обычно не требует специального оборудования, однако после замены необходима перепрограммирование или адаптация в некоторых автомобилях. Рекомендуется обратиться к специалисту.