OBD Guide

P06B8

Internal Control Module Non-Volatile Random Access Memory (NVRAM) Error

P06B8 is an OBD-II diagnostic trouble code meaning: Internal Control Module Non-Volatile Random Access Memory (NVRAM) Error. Common causes: failure of the nvram chip (eeprom/flash) in the ecu, memory damage due to a power surge or short circuit in the on-board network. Estimated repair cost: $33โ€“667.

Severity
๐Ÿ”ด High
Can you drive?
Limited driving only, diagnose soon
Approx. repair cost
$33โ€“667 (est.)

Symptoms

  • Check Engine Light Is On
  • The computer resets the adaptation parameters after turning off the ignition
  • Unstable engine operation (loss of mixture adaptation, idle speed)
  • Possible loss of immobilizer settings
  • Lots of random error codes

Causes

  • Failure of the NVRAM chip (EEPROM/Flash) in the ECU
  • Memory damage due to a power surge or short circuit in the on-board network
  • Exposure to moisture on the ECU board
  • Long service life and exceeding memory write cycle
  • Incorrect ECU flashing

How to Fix

  1. Read all error codes and evaluate their totality
  2. Check the voltage of the on-board network - exclude surges or unstable power supply to the ECU
  3. Try a full ECU memory reset (power off for 15+ minutes)
  4. Perform a backup reading of the ECU data and try to reflash it
  5. Send the ECU for diagnostics and memory repair to a specialized workshop
  6. If repair is impossible, replace the ECU with flashing and coding

Related codes

Error P06B8 by Vehicle Brand

FAQ

What does the P06B8 code mean?

P06B8 is an OBD-II diagnostic trouble code that indicates: Internal Control Module Non-Volatile Random Access Memory (NVRAM) Error

What causes a P06B8 error code?

The most common causes of P06B8 include: Failure of the NVRAM chip (EEPROM/Flash) in the ECU; Memory damage due to a power surge or short circuit in the on-board network; Exposure to moisture on the ECU board; Long service life and exceeding memory write cycle.

How do I fix a P06B8 diagnostic trouble code?

To fix P06B8: Read all error codes and evaluate their totality. Check the voltage of the on-board network - exclude surges or unstable power supply to the ECU. Try a full ECU memory reset (power off for 15+ minutes). For a complete diagnosis, use an OBD-II scanner.

Is it safe to drive with P06B8?

Limited driving only, diagnose soon

How much does it cost to fix P06B8?

The estimated repair cost for P06B8 is $33โ€“667. Actual cost depends on your vehicle, location, and labor rates.

See also: Russian version ยท NationStat