Error P0708 on GAC все модели
Transmission Range Sensor A Circuit High
Code
P0708
Vehicle
GAC все модели
Category
Powertrain
Severity
⚠️ MediumSymptoms
- Check Engine light is on
- The gearbox goes into emergency mode
- The car does not start (does not see P/N)
- Incorrect display of selector position on the dashboard
- Gear shifting problems
Causes
- Transmission Range Sensor (TRS) Malfunction
- Short circuit to positive in the sensor circuit
- Broken or damaged sensor wiring harness
- Poor contact in sensor connectors
- Transmission control module (TCM) malfunction
How to Fix
- Check TRS sensor voltage and resistance according to specification
- Inspect the wiring harness and connectors for damage
- Check the circuit between the sensor and the TCM for a short or open circuit.
- Replace transmission range sensor if necessary
- If the problem persists, check the TCM
FAQ
Можно ли временно устранить проблему самостоятельно?
Временное решение возможно только если очистка контактов датчика помогла, но проблема требует профессиональной диагностики.
Как проверить датчик диапазона передач в домашних условиях?
Потребуется мультиметр для проверки сопротивления и напряжения на контактах датчика согласно руководству по ремонту конкретной модели.