Error P1406 on GMC все модели
EGR Valve Pintle Position Circuit
Code
P1406
Vehicle
GMC все модели
Category
Powertrain
Severity
⚠️ MediumSymptoms
- Unstable engine idling
- Reduced engine power
- Increased fuel consumption
- Check Engine Light Illuminates
- Dips during acceleration
Causes
- EGR position sensor malfunction
- Open or short circuit in the sensor circuit
- Poor contact in the sensor connector
- Mechanical problems of the EGR valve
- Sensor contamination with carbon deposits
How to Fix
- Check the continuity of the EGR position sensor circuit
- Clean sensor connector contacts
- Check the mechanical operation of the EGR valve
- Replace EGR position sensor if necessary
- Test the system after repair
FAQ
Можно ли временно отключить систему EGR при этой ошибке?
Временное отключение системы EGR может привести к увеличению выбросов и ухудшению работы двигателя на некоторых режимах. Рекомендуется ремонт.
Как проверить датчик положения EGR самостоятельно?
Для проверки потребуется мультиметр. Нужно измерить сопротивление датчика и проверить изменение напряжения при перемещении клапана EGR вручную (если возможно).