P1910
Electronic Gear Selector Module: Control Unit Over Voltage
P1910 is an OBD-II diagnostic trouble code meaning: Electronic Gear Selector Module: Control Unit Over Voltage. Common causes: problems with the generator (high voltage in the on-board network), gear selector module malfunction. Estimated repair cost: $56–278.
Symptoms
- Incorrect gear shifting
- Check Engine Light Illuminates
- Problems with selecting gearbox modes
- Intermittent transmission operation
- Failure to switch to certain modes
Causes
- Problems with the generator (high voltage in the on-board network)
- Gear selector module malfunction
- Damaged wiring or poor contacts
- Relay or fuse problems
- Short circuit in control circuit
How to Fix
- Check the voltage in the on-board network (should be 12-14.5V)
- Inspect the wiring harness and selector module connectors
- Check the condition of fuses and relays
- Test the gear selector module
- If necessary, replace the selector module
Related codes
FAQ
What does the P1910 code mean?
P1910 is an OBD-II diagnostic trouble code that indicates: Electronic Gear Selector Module: Control Unit Over Voltage
What causes a P1910 error code?
The most common causes of P1910 include: Problems with the generator (high voltage in the on-board network); Gear selector module malfunction; Damaged wiring or poor contacts; Relay or fuse problems.
How do I fix a P1910 diagnostic trouble code?
To fix P1910: Check the voltage in the on-board network (should be 12-14.5V). Inspect the wiring harness and selector module connectors. Check the condition of fuses and relays. For a complete diagnosis, use an OBD-II scanner.
Is it safe to drive with P1910?
Do not drive — repair immediately
How much does it cost to fix P1910?
The estimated repair cost for P1910 is $56–278. Actual cost depends on your vehicle, location, and labor rates.
See also: Russian version · NationStat