Error P2803 on Audi все модели
Powertrain Control Module (PCM) failure, Transmission Control Module (TCM) failure, Transmission range sensor failure, Wiring issue
Code
P2803
Vehicle
Audi все модели
Category
Powertrain
Severity
⚠️ MediumSymptoms
- Check Engine light comes on
- Problems starting the engine
- Incorrect gear shifting
- The transmission goes into emergency mode
- Power Loss
Causes
- Gear Range Sensor B Malfunction
- Open or short circuit in the sensor circuit
- Poor contact in connectors
- Wiring harness damage
- Transmission control unit malfunction
How to Fix
- Check the condition of the gear range sensor B
- Check the integrity of the sensor circuit
- Inspect connectors and contacts for corrosion or damage
- Check wiring harness for damage
- If necessary, replace the sensor or repair the circuit
FAQ
Можно ли ездить с кодом P2803?
Кратковременное движение возможно, но могут возникнуть проблемы с переключением передач, поэтому рекомендуется как можно скорее провести диагностику.
Как проверить датчик диапазона передач?
Для проверки датчика необходимо измерить его сопротивление и проверить сигнал с помощью сканера или осциллографа, сравнивая показания с техническими характеристиками производителя.