OBD Guide
ENFRDEESPT

P2810

Pressure Control Solenoid G Electrical

P2810 is an OBD-II diagnostic trouble code meaning: Pressure Control Solenoid G Electrical. Common causes: open or short circuit in the solenoid valve circuit, malfunction of the solenoid valve itself. Estimated repair cost: $17–67.

Severity
⚠️ Medium
Can you drive?
Limited driving only, diagnose soon
Approx. repair cost
$17–67 (est.)

Symptoms

  • Jerky gear shifting
  • The gearbox goes into emergency mode
  • Check Engine light comes on
  • Reduced vehicle dynamics
  • Increased fuel consumption

Causes

  • Open or short circuit in the solenoid valve circuit
  • Malfunction of the solenoid valve itself
  • Problems with the wiring harness or connectors
  • Transmission control unit malfunction
  • Low transmission fluid level

How to Fix

  1. Check the level and condition of the transmission fluid
  2. Check the integrity of the circuit and connectors of the solenoid valve
  3. Check the resistance of the solenoid valve
  4. If necessary, replace the solenoid valve
  5. Clear errors and take a test drive

Related codes

P2808P2809P2811

Error P2810 by Vehicle Brand

AcuraAudiBAICBMWBYDBuickCadillacChanganCheryChevroletChryslerCitroenDodgeDongfengExeedFAWFordForthingFotonGACGMGMCGeelyGreat WallHavalHondaHongqiHyundaiInfinitiJACJaecooJaguarJeepJetourKaiyiKiaLadaLexusLi AutoLifanLincolnLivanMazdaMercedes-BenzMercuryMitsubishiNIONissanOldsmobileOmodaOpelPeugeotPlymouthPontiacRenaultSWMSaturnSkodaSkywellSubaruSuzukiTankToyotaVolkswagenVolvoVoyahXPengZeekrZotye

FAQ

What does the P2810 code mean?

P2810 is an OBD-II diagnostic trouble code that indicates: Pressure Control Solenoid G Electrical

What causes a P2810 error code?

The most common causes of P2810 include: Open or short circuit in the solenoid valve circuit; Malfunction of the solenoid valve itself; Problems with the wiring harness or connectors; Transmission control unit malfunction.

How do I fix a P2810 diagnostic trouble code?

To fix P2810: Check the level and condition of the transmission fluid. Check the integrity of the circuit and connectors of the solenoid valve. Check the resistance of the solenoid valve. For a complete diagnosis, use an OBD-II scanner.

Is it safe to drive with P2810?

Limited driving only, diagnose soon

How much does it cost to fix P2810?

The estimated repair cost for P2810 is $17–67. Actual cost depends on your vehicle, location, and labor rates.

FRDEESPT

See also: Russian version · NationStat