OBD Guide

C062A

Variable Effort Steering Module Temperature Too High

C062A is an OBD-II diagnostic trouble code meaning: Variable Effort Steering Module Temperature Too High. Common causes: steering system overload (holding the steering wheel in extreme positions for a long time), dirty or faulty eps module ventilation ducts. Estimated repair cost: $167–444.

Severity
⚠️ Medium
Can you drive?
Limited driving only, diagnose soon
Approx. repair cost
$167–444 (est.)

Symptoms

  • Increased steering effort (especially at low speeds)
  • Disappearance/appearance of the amplifier when the system warms up
  • Dashboard warning message (if equipped)
  • EPS/Power Steering light flashing

Causes

  • Steering system overload (holding the steering wheel in extreme positions for a long time)
  • Dirty or faulty EPS module ventilation ducts
  • Problems with the wiring harness or contacts (short circuit, frayed wires)
  • Low battery electrolyte level (causes increased load on the system)
  • Defective temperature sensor or EPS control module itself

How to Fix

  1. Allow the system to cool (15-30 minutes) and check for the error to reappear
  2. Visually inspect the EPS module for dirt/damage
  3. Check the condition of the wiring harness and connectors
  4. Perform a voltage/resistance test on the EPS temperature sensor circuit.
  5. If necessary, replace the power steering module (calibration required)

Related codes

Error C062A by Vehicle Brand

FAQ

What does the C062A code mean?

C062A is an OBD-II diagnostic trouble code that indicates: Variable Effort Steering Module Temperature Too High

What causes a C062A error code?

The most common causes of C062A include: Steering system overload (holding the steering wheel in extreme positions for a long time); Dirty or faulty EPS module ventilation ducts; Problems with the wiring harness or contacts (short circuit, frayed wires); Low battery electrolyte level (causes increased load on the system).

How do I fix a C062A diagnostic trouble code?

To fix C062A: Allow the system to cool (15-30 minutes) and check for the error to reappear. Visually inspect the EPS module for dirt/damage. Check the condition of the wiring harness and connectors. For a complete diagnosis, use an OBD-II scanner.

Is it safe to drive with C062A?

Limited driving only, diagnose soon

How much does it cost to fix C062A?

The estimated repair cost for C062A is $167–444. Actual cost depends on your vehicle, location, and labor rates.

See also: Russian version · NationStat