Error P036B on BYD все модели
Ignition G Control Signal Circuit Low
Code
P036B
Vehicle
BYD все модели
Category
Powertrain
Severity
🔴 HighSymptoms
- Misfire or complete lack of spark in the cylinders of the coil G
- Unstable idle
- Possible overheating of the coil or wiring
- Check Engine Light Is On
- In severe cases, it is impossible to start the engine
Causes
- G coil control circuit wiring short to ground
- Ignition coil G fault (internal short circuit)
- Damage to the coil connector (contact is shorted to the body)
- ECU control transistor malfunction
- Moisture in the connector or coil
How to Fix
- Read error codes, freeze frame data
- Disconnect the coil connector G and check for an error - if it disappears, the problem is in the coil
- Check the short-circuit wiring between the coil connector and the ECU to ground (multimeter in Ohm mode)
- Inspect the wiring for pinches on metal parts
- Check the resistance of the primary winding of the coil G
- Replace the coil or eliminate short circuit in the wiring
FAQ
Может ли P036B повредить ЭБУ?
Да, длительное КЗ на массу в цепи управления катушкой может вывести из строя управляющий транзистор ЭБУ. Диагностика необходима как можно скорее.
Как отличить КЗ в катушке от КЗ в проводке?
Отключите разъём катушки. Если КЗ исчезает — неисправна катушка. Если остаётся — проблема в проводке.