P03CE
Cylinder 6 Pressure Variation Low
P03CE is an OBD-II diagnostic trouble code meaning: Cylinder 6 Pressure Variation Low. Common causes: low compression in cylinder 6 (wear of rings, valves), clogged fuel injector of cylinder 6. Estimated repair cost: $33–444.
Symptoms
- Check Engine light on
- Engine vibration, especially at medium speeds
- Misfire in cylinder 6
- Reduced engine power and thrust
- Increased fuel consumption
Causes
- Low compression in cylinder 6 (wear of rings, valves)
- Clogged fuel injector of cylinder 6
- Bad spark plug or coil
- Stuck or burnt valves
- Pressure sensor malfunction (false low reading)
How to Fix
- Carry out a compression test on cylinder 6 and compare with the norm
- Check the spark plug and coil of cylinder 6
- Perform injector balance test - check cylinder 6 injector
- If compression is low, perform a cylinder leak-down test.
- Check the pressure sensor of cylinder 6 for accuracy of readings
- Eliminate the cause and reset error codes
Related codes
Error P03CE by Vehicle Brand
FAQ
What does the P03CE code mean?
P03CE is an OBD-II diagnostic trouble code that indicates: Cylinder 6 Pressure Variation Low
What causes a P03CE error code?
The most common causes of P03CE include: Low compression in cylinder 6 (wear of rings, valves); Clogged fuel injector of cylinder 6; Bad spark plug or coil; Stuck or burnt valves.
How do I fix a P03CE diagnostic trouble code?
To fix P03CE: Carry out a compression test on cylinder 6 and compare with the norm. Check the spark plug and coil of cylinder 6. Perform injector balance test - check cylinder 6 injector. For a complete diagnosis, use an OBD-II scanner.
Is it safe to drive with P03CE?
Do not drive — repair immediately
How much does it cost to fix P03CE?
The estimated repair cost for P03CE is $33–444. Actual cost depends on your vehicle, location, and labor rates.
See also: Russian version · NationStat