Error P05BE on Chery все модели
Stop-Start Mode Switch Circuit Low
Code
P05BE
Vehicle
Chery все модели
Category
Powertrain
Severity
✅ LowSymptoms
- The start-stop system does not work or is deactivated
- Check Engine Light Is On
- The start-stop system indicator does not flash when stopping
- Possible increase in fuel consumption in the urban cycle
- Warning message on the instrument panel indicating a system malfunction
Causes
- Broken or damaged wiring in the start-stop switch circuit
- Signal wire short circuit to ground
- Oxidation or poor contact in the switch connector
- Faulty start-stop switch
- ECU module malfunction (rare)
How to Fix
- Connect the diagnostic scanner and read all associated error codes
- Check the start-stop switch circuit diagram in the technical documentation
- Inspect the wiring from the switch to the computer for breaks, chafing, or damage.
- Check the switch connector: clean the contacts from oxidation, make sure there is a reliable connection
- Measure the voltage and resistance in the switch circuit with a multimeter
- Replace the start-stop switch if it is confirmed to be faulty
FAQ
Можно ли ездить с кодом P05BE?
Да, автомобиль остаётся полностью управляемым. Система старт-стоп просто отключается, двигатель работает постоянно, как в обычном автомобиле без этой системы. Однако диагностику провести рекомендуется.
Почему система старт-стоп перестала работать?
При коде P05BE ЭБУ фиксирует недостаточное напряжение в цепи переключателя и в целях безопасности отключает функцию старт-стоп. Чаще всего причина — повреждение проводки или окисление контактов разъёма переключателя.
Как сбросить код P05BE?
Сброс кода возможен через диагностический сканер после устранения неисправности. Самостоятельный сброс без ремонта приведёт к повторному появлению кода при следующей поездке.