OBD Guide
ENFRDEESPT

P05EB

Cold Start SCR NOx Catalyst Inlet Temperature Too Low

P05EB is an OBD-II diagnostic trouble code meaning: Cold Start SCR NOx Catalyst Inlet Temperature Too Low. Common causes: slow engine warm-up (thermostat opens prematurely), exhaust gas temperature sensor malfunction. Estimated repair cost: $56–444.

Severity
⚠️ Medium
Can you drive?
Limited driving only, diagnose soon
Approx. repair cost
$56–444 (est.)

Symptoms

  • Check Engine Light Is On
  • Reduced NOx neutralization efficiency
  • Possible power limitation in SCR Limp Mode
  • Increased consumption of AdBlue reagent
  • Additional aftertreatment warnings

Causes

  • Slow engine warm-up (thermostat opens prematurely)
  • Exhaust gas temperature sensor malfunction
  • Malfunction of the AdBlue dosing system during cold start
  • SCR catalyst clogged or degraded
  • Malfunction of the active catalyst heating system

How to Fix

  1. Read all codes, pay attention to the accompanying SCR and AdBlue codes
  2. Check the coolant temperature - the thermostat should open at 85–95°C
  3. Check exhaust gas temperature sensors (before and after SCR)
  4. Check the level and quality of AdBlue reagent
  5. Check the AdBlue dosing system during cold starts
  6. If necessary, diagnose the SCR catalyst

Related codes

P05ECP2200P2201P2202P20E8P204F

Error P05EB by Vehicle Brand

AcuraAudiBAICBMWBYDBuickCadillacChanganCheryChevroletChryslerCitroenDodgeDongfengExeedFAWFordForthingFotonGACGMGMCGeelyGreat WallHavalHondaHongqiHyundaiInfinitiJACJaecooJaguarJeepJetourKaiyiKiaLadaLexusLi AutoLifanLincolnLivanMazdaMercedes-BenzMercuryMitsubishiNIONissanOldsmobileOmodaOpelPeugeotPlymouthPontiacRenaultSWMSaturnSkodaSkywellSubaruSuzukiTankToyotaVolkswagenVolvoVoyahXPengZeekrZotye

FAQ

What does the P05EB code mean?

P05EB is an OBD-II diagnostic trouble code that indicates: Cold Start SCR NOx Catalyst Inlet Temperature Too Low

What causes a P05EB error code?

The most common causes of P05EB include: Slow engine warm-up (thermostat opens prematurely); Exhaust gas temperature sensor malfunction; Malfunction of the AdBlue dosing system during cold start; SCR catalyst clogged or degraded.

How do I fix a P05EB diagnostic trouble code?

To fix P05EB: Read all codes, pay attention to the accompanying SCR and AdBlue codes. Check the coolant temperature - the thermostat should open at 85–95°C. Check exhaust gas temperature sensors (before and after SCR). For a complete diagnosis, use an OBD-II scanner.

Is it safe to drive with P05EB?

Limited driving only, diagnose soon

How much does it cost to fix P05EB?

The estimated repair cost for P05EB is $56–444. Actual cost depends on your vehicle, location, and labor rates.

FRDEESPT

See also: Russian version · NationStat