OBD Guide
ENFRDEESPT

P060A

Internal Control Module Monitoring Processor Performance

P060A is an OBD-II diagnostic trouble code meaning: Internal Control Module Monitoring Processor Performance. Common causes: internal fault of the ecu secondary processor, communication error between main and monitoring processors. Estimated repair cost: $22–667.

Severity
🚨 Critical
Can you drive?
Do not drive — repair immediately
Approx. repair cost
$22–667 (est.)

Symptoms

  • The Check Engine light comes on
  • Emergency engine operation
  • Limiting maximum power and speed
  • Unstable engine operation
  • Possible startup failure for safety reasons

Causes

  • Internal fault of the ECU secondary processor
  • Communication error between main and monitoring processors
  • Main processor calculations do not match control values
  • Unstable power supply to the ECU, causing processor malfunctions
  • Damage to the ECU firmware

How to Fix

  1. Check the ECU supply voltage and battery condition
  2. Check for ECU firmware updates at an authorized dealer
  3. Initialize the ECU using a dealer scanner
  4. Send the car to an official dealer for in-depth diagnostics
  5. If an internal fault is confirmed, replace the ECU

Related codes

P060BP060CP0606P0607

Error P060A by Vehicle Brand

AcuraAudiBAICBMWBYDBuickCadillacChanganCheryChevroletChryslerCitroenDodgeDongfengExeedFAWFordForthingFotonGACGMGMCGeelyGreat WallHavalHondaHongqiHyundaiInfinitiJACJaecooJaguarJeepJetourKaiyiKiaLadaLexusLi AutoLifanLincolnLivanMazdaMercedes-BenzMercuryMitsubishiNIONissanOldsmobileOmodaOpelPeugeotPlymouthPontiacRenaultSWMSaturnSkodaSkywellSubaruSuzukiTankToyotaVolkswagenVolvoVoyahXPengZeekrZotye

FAQ

What does the P060A code mean?

P060A is an OBD-II diagnostic trouble code that indicates: Internal Control Module Monitoring Processor Performance

What causes a P060A error code?

The most common causes of P060A include: Internal fault of the ECU secondary processor; Communication error between main and monitoring processors; Main processor calculations do not match control values; Unstable power supply to the ECU, causing processor malfunctions.

How do I fix a P060A diagnostic trouble code?

To fix P060A: Check the ECU supply voltage and battery condition. Check for ECU firmware updates at an authorized dealer. Initialize the ECU using a dealer scanner. For a complete diagnosis, use an OBD-II scanner.

Is it safe to drive with P060A?

Do not drive — repair immediately

How much does it cost to fix P060A?

The estimated repair cost for P060A is $22–667. Actual cost depends on your vehicle, location, and labor rates.

FRDEESPT

See also: Russian version · NationStat