OBD Guide
ENFRDEESPT

P06B7

Internal Control Module Knock/Combustion Vibration Sensor Processor 2 Performance

P06B7 is an OBD-II diagnostic trouble code meaning: Internal Control Module Knock/Combustion Vibration Sensor Processor 2 Performance. Common causes: internal malfunction of the processor 2 knock sensor in the ecu, damage to the ecu from overheating, moisture or electrical discharge. Estimated repair cost: $33–667.

Severity
🔴 High
Can you drive?
Limited driving only, diagnose soon
Approx. repair cost
$33–667 (est.)

Symptoms

  • Check Engine Light Is On
  • Reduced engine power and thrust
  • Increased fuel consumption
  • Possible detonation in individual cylinders at high loads
  • The ECU operates with a retarded ignition angle for safety

Causes

  • Internal malfunction of the processor 2 knock sensor in the ECU
  • Damage to the ECU from overheating, moisture or electrical discharge
  • Software error in the detonation signal processing algorithm
  • Malfunction of the knock sensor connected to processor 2
  • Damage to the knock sensor wiring (second channel)

How to Fix

  1. Read error codes, check knock sensor codes P0325–P0334 for channel 2
  2. Check the functionality of the knock sensor of the second channel and its wiring
  3. Perform a full diagnostic of the ECU using an advanced scanner
  4. Try updating the ECU firmware if there is an official update
  5. If an internal malfunction is confirmed, repair or replace the ECU
  6. Reset codes, perform a load test in various modes

Related codes

P06B6P0330P0331P0332P0333

Error P06B7 by Vehicle Brand

AcuraAudiBAICBMWBYDBuickCadillacChanganCheryChevroletChryslerCitroenDodgeDongfengExeedFAWFordForthingFotonGACGMGMCGeelyGreat WallHavalHondaHongqiHyundaiInfinitiJACJaecooJaguarJeepJetourKaiyiKiaLadaLexusLi AutoLifanLincolnLivanMazdaMercedes-BenzMercuryMitsubishiNIONissanOldsmobileOmodaOpelPeugeotPlymouthPontiacRenaultSWMSaturnSkodaSkywellSubaruSuzukiTankToyotaVolkswagenVolvoVoyahXPengZeekrZotye

FAQ

What does the P06B7 code mean?

P06B7 is an OBD-II diagnostic trouble code that indicates: Internal Control Module Knock/Combustion Vibration Sensor Processor 2 Performance

What causes a P06B7 error code?

The most common causes of P06B7 include: Internal malfunction of the processor 2 knock sensor in the ECU; Damage to the ECU from overheating, moisture or electrical discharge; Software error in the detonation signal processing algorithm; Malfunction of the knock sensor connected to processor 2.

How do I fix a P06B7 diagnostic trouble code?

To fix P06B7: Read error codes, check knock sensor codes P0325–P0334 for channel 2. Check the functionality of the knock sensor of the second channel and its wiring. Perform a full diagnostic of the ECU using an advanced scanner. For a complete diagnosis, use an OBD-II scanner.

Is it safe to drive with P06B7?

Limited driving only, diagnose soon

How much does it cost to fix P06B7?

The estimated repair cost for P06B7 is $33–667. Actual cost depends on your vehicle, location, and labor rates.

FRDEESPT

See also: Russian version · NationStat