Error P06CE on JAC все модели
Cylinder 10 Glow Plug Incorrect
Code
P06CE
Vehicle
JAC все модели
Category
Powertrain
Severity
⚠️ MediumSymptoms
- Difficult cold starting of diesel engine
- Smoke when starting and warming up
- Unstable engine operation during warm-up mode
- The warning light on the instrument panel is on
- Increased fuel consumption
Causes
- Failure of the glow plug of cylinder 10
- Damage to the spark plug wiring or connector
- Malfunction of the glow plug control module
- Interturn short circuit in the spark plug winding
- Unstable power supply to the vehicle's on-board network
How to Fix
- Read error codes using a scan tool
- Locate the glow plug for cylinder 10 and inspect its wiring
- Measure the resistance of the spark plug - if the value is outside the range of 0.5–2 Ohms, replace the spark plug
- Check the integrity of the control circuit and the voltage at the connector
- Check the spark plug control module for internal errors
- After repair, reset errors and make sure the system is working correctly
FAQ
На каких автомобилях встречается код P06CE?
Код P06CE характерен для крупных дизельных двигателей V10 и V12: Audi Q7 V12 TDI, VW Touareg V10 TDI, а также тяжёлых грузовых автомобилей и спецтехники.
Можно ли ехать с кодом P06CE зимой?
В морозную погоду эксплуатация крайне нежелательна: неисправная свеча накаливания существенно затруднит запуск двигателя и может привести к его повреждению при попытках принудительного пуска.
Как часто нужно проверять свечи накаливания?
Рекомендуется проверять состояние свечей накаливания каждые 60 000 км или при подготовке автомобиля к зимней эксплуатации.