Error P06F6 on Subaru все модели
Glow Plug Control Module 2 Control Circuit/Open
Code
P06F6
Vehicle
Subaru все модели
Category
Powertrain
Severity
🔴 HighSymptoms
- Check Engine light on
- The spark plugs of the second group of cylinders do not work
- Difficult cold starting at low temperatures
- Unstable operation during warm-up
- Error codes for cylinders of the second bank
Causes
- Broken wire in the ECU-GPCM2 communication line
- Oxidation or damage to the GPCM2 connector
- GPCM2 internal circuit malfunction
- No power or ground GPCM2
- Internal ECU fault (GPCM2 control port)
How to Fix
- Check for power and ground on GPCM2
- Check the integrity of the control line wire from the ECU to GPCM2
- Inspect the GPCM2 connector for corrosion and damage
- Make sure that the ECU receives a response from GPCM2 (check via scanner)
- If there is a break, restore or replace the control line wire
- If there is an internal fault in GPCM2, replace the module
FAQ
Чем P06F6 отличается от P06F5?
P06F5 (General) — общий код неисправности GPCM2 без уточнения характера. P06F6 (Control Circuit/Open) — конкретно указывает на обрыв цепи управления, то есть разрыв физической линии связи между ЭБУ и GPCM2.
Как проверить линию связи ЭБУ–GPCM2?
По электросхеме найдите провод управляющей линии. Подключите омметр между выводом ЭБУ и соответствующим выводом GPCM2 (при отключённых блоках). Бесконечное сопротивление означает обрыв.
Можно ли сбросить P06F6 и ехать?
Сброс кода даст лишь временный эффект — код вернётся, если причина не устранена. Физический обрыв провода требует ремонта.