Error P279E on JAC все модели
Four Wheel Drive (4WD) Range Signal Circuit Range/Performance
Code
P279E
Vehicle
JAC все модели
Category
Powertrain
Severity
⚠️ MediumSymptoms
- Flashing 4WD light on dashboard
- Inability to switch between drive modes (2WD, 4H, 4L)
- System gets stuck in one drive mode
- Reduced dynamics or strange behavior of the car when driving
- Other related trouble codes may appear
Causes
- Faulty transfer case range position sensor
- Open or short circuit in range signal circuit
- Problems with the solenoid valve or mode switching motor
- Mechanical faults in the linkage of the transfer case
- Four-wheel drive control module or TCM malfunction
How to Fix
- Read fault codes and freeze frame data using a scanner
- Visually inspect the wiring harness and sensor/module connectors for damage.
- Check the resistance and reference voltage of the range position sensor
- Check operation of solenoid valves or shift actuators
- If necessary, replace the position sensor or control module
FAQ
Можно ли ездить с кодом P279E?
Да, но рекомендуется избегать переключения режимов привода и эксплуатировать автомобиль в основном режиме (обычно 2WD) до диагностики.
Что чаще всего выходит из строя при этой ошибке?
Чаще всего виноват сам датчик положения диапазона на раздаточной коробке или окисление контактов в его разъеме.