OBD Guide
ENFRDEESPT

P27EE

Transmission Range Control A Position Sensor/Switch Circuit High

P27EE is an OBD-II diagnostic trouble code meaning: Transmission Range Control A Position Sensor/Switch Circuit High. Common causes: gear selector position sensor malfunction, open or short circuit in the sensor circuit. Estimated repair cost: $28–89.

Severity
⚠️ Medium
Can you drive?
Limited driving only, diagnose soon
Approx. repair cost
$28–89 (est.)

Symptoms

  • Incorrect display of selector position on the instrument panel
  • Problems starting the engine in certain modes
  • The vehicle may not be moving in the same direction as the selected mode.
  • Gear shifts are delayed or jerky
  • Possible emergency operation of the automatic transmission

Causes

  • Gear selector position sensor malfunction
  • Open or short circuit in the sensor circuit
  • Poor contact in sensor connectors
  • Wiring harness damage
  • Problems with the automatic transmission control unit

How to Fix

  1. Check the condition and connection of the selector lever position sensor
  2. Check the integrity of the wiring and connectors in the sensor circuit
  3. Measure resistance and voltage at the sensor
  4. If necessary, replace the selector lever position sensor
  5. Check and, if necessary, reflash the automatic transmission control unit

Related codes

P27EFP27EDP0705

Error P27EE by Vehicle Brand

AcuraAudiBAICBMWBYDBuickCadillacChanganCheryChevroletChryslerCitroenDodgeDongfengExeedFAWFordForthingFotonGACGMGMCGeelyGreat WallHavalHondaHongqiHyundaiInfinitiJACJaecooJaguarJeepJetourKaiyiKiaLadaLexusLi AutoLifanLincolnLivanMazdaMercedes-BenzMercuryMitsubishiNIONissanOldsmobileOmodaOpelPeugeotPlymouthPontiacRenaultSWMSaturnSkodaSkywellSubaruSuzukiTankToyotaVolkswagenVolvoVoyahXPengZeekrZotye

FAQ

What does the P27EE code mean?

P27EE is an OBD-II diagnostic trouble code that indicates: Transmission Range Control A Position Sensor/Switch Circuit High

What causes a P27EE error code?

The most common causes of P27EE include: Gear selector position sensor malfunction; Open or short circuit in the sensor circuit; Poor contact in sensor connectors; Wiring harness damage.

How do I fix a P27EE diagnostic trouble code?

To fix P27EE: Check the condition and connection of the selector lever position sensor. Check the integrity of the wiring and connectors in the sensor circuit. Measure resistance and voltage at the sensor. For a complete diagnosis, use an OBD-II scanner.

Is it safe to drive with P27EE?

Limited driving only, diagnose soon

How much does it cost to fix P27EE?

The estimated repair cost for P27EE is $28–89. Actual cost depends on your vehicle, location, and labor rates.

FRDEESPT

See also: Russian version · NationStat