OBD Guide
ENFRDEESPT

P0006

Fuel Shutoff ValveAControl Circuit Low

P0006 is an OBD-II diagnostic trouble code meaning: Fuel Shutoff ValveAControl Circuit Low. Common causes: open or short circuit in the wiring of the fuel shut-off valve, poor contact in valve connector. Estimated repair cost: $33–167.

Severity
⚠️ Medium
Can you drive?
Limited driving only, diagnose soon
Approx. repair cost
$33–167 (est.)

Symptoms

  • Check Engine Light Is On
  • Unstable engine idling
  • Increased fuel consumption
  • Loss of engine power
  • Jerks when accelerating
  • Difficulty starting the engine

Causes

  • Open or short circuit in the wiring of the fuel shut-off valve
  • Poor contact in valve connector
  • Fuel cut-off valve A malfunction
  • Wiring harness damage
  • Contact corrosion
  • Engine control module (ECM) malfunction
  • Low voltage in the on-board network

How to Fix

  1. Connect a diagnostic scanner and read all error codes
  2. Check battery and generator voltage
  3. Visually inspect the fuel shutoff valve wiring for damage.
  4. Check the resistance of fuel shut-off valve A with a multimeter
  5. Check the integrity of the wiring from the ECM to the valve
  6. Clean and check valve connector contacts
  7. If necessary, replace damaged wiring
  8. Replace the fuel shut-off valve if it is faulty
  9. Clear error codes and test drive

Related codes

P0007P0008P0009P0087P0088

Error P0006 by Vehicle Brand

AcuraAudiBAICBMWBYDBuickCadillacChanganCheryChevroletChryslerCitroenDodgeDongfengExeedFAWFordForthingFotonGACGMGMCGeelyGreat WallHavalHondaHongqiHyundaiInfinitiJACJaecooJaguarJeepJetourKaiyiKiaLadaLexusLi AutoLifanLincolnLivanMazdaMercedes-BenzMercuryMitsubishiNIONissanOldsmobileOmodaOpelPeugeotPlymouthPontiacRenaultSWMSaturnSkodaSkywellSubaruSuzukiTankToyotaVolkswagenVolvoVoyahXPengZeekrZotye

FAQ

What does the P0006 code mean?

P0006 is an OBD-II diagnostic trouble code that indicates: Fuel Shutoff ValveAControl Circuit Low

What causes a P0006 error code?

The most common causes of P0006 include: Open or short circuit in the wiring of the fuel shut-off valve; Poor contact in valve connector; Fuel cut-off valve A malfunction; Wiring harness damage.

How do I fix a P0006 diagnostic trouble code?

To fix P0006: Connect a diagnostic scanner and read all error codes. Check battery and generator voltage. Visually inspect the fuel shutoff valve wiring for damage.. For a complete diagnosis, use an OBD-II scanner.

Is it safe to drive with P0006?

Limited driving only, diagnose soon

How much does it cost to fix P0006?

The estimated repair cost for P0006 is $33–167. Actual cost depends on your vehicle, location, and labor rates.

FRDEESPT

See also: Russian version · NationStat