OBD Guide
ENFRDEESPT

P002F

B Camshaft Profile Actuator A Control Circuit High Bank 2

P002F is an OBD-II diagnostic trouble code meaning: B Camshaft Profile Actuator A Control Circuit High Bank 2. Common causes: open or short circuit in vvt solenoid control circuit, malfunction of variable valve timing solenoid. Estimated repair cost: $56–167.

Severity
⚠️ Medium
Can you drive?
Limited driving only, diagnose soon
Approx. repair cost
$56–167 (est.)

Symptoms

  • Check Engine light comes on
  • Deterioration in acceleration dynamics
  • Increased fuel consumption
  • Unstable engine operation at idle
  • Power Loss

Causes

  • Open or short circuit in VVT solenoid control circuit
  • Malfunction of variable valve timing solenoid
  • Wiring harness problems or poor connections
  • Mechanical failure of the VVT mechanism
  • Low oil level or poor oil quality
  • Malfunction of the engine control unit (rare)

How to Fix

  1. Check the level and condition of the engine oil
  2. Visually inspect the VVT solenoid wiring harness and connectors
  3. Check the integrity of the solenoid control circuit
  4. Test VVT solenoid resistance
  5. Check the operating voltage at the solenoid
  6. Replace VVT solenoid if necessary
  7. Check the valve timing mechanism
  8. Reset the error and check for reappearance

Related codes

P002AP002BP002EP0010P0011

Error P002F by Vehicle Brand

AcuraAudiBAICBMWBYDBuickCadillacChanganCheryChevroletChryslerCitroenDodgeDongfengExeedFAWFordForthingFotonGACGMGMCGeelyGreat WallHavalHondaHongqiHyundaiInfinitiJACJaecooJaguarJeepJetourKaiyiKiaLadaLexusLi AutoLifanLincolnLivanMazdaMercedes-BenzMercuryMitsubishiNIONissanOldsmobileOmodaOpelPeugeotPlymouthPontiacRenaultSWMSaturnSkodaSkywellSubaruSuzukiTankToyotaVolkswagenVolvoVoyahXPengZeekrZotye

FAQ

What does the P002F code mean?

P002F is an OBD-II diagnostic trouble code that indicates: B Camshaft Profile Actuator A Control Circuit High Bank 2

What causes a P002F error code?

The most common causes of P002F include: Open or short circuit in VVT solenoid control circuit; Malfunction of variable valve timing solenoid; Wiring harness problems or poor connections; Mechanical failure of the VVT mechanism.

How do I fix a P002F diagnostic trouble code?

To fix P002F: Check the level and condition of the engine oil. Visually inspect the VVT solenoid wiring harness and connectors. Check the integrity of the solenoid control circuit. For a complete diagnosis, use an OBD-II scanner.

Is it safe to drive with P002F?

Limited driving only, diagnose soon

How much does it cost to fix P002F?

The estimated repair cost for P002F is $56–167. Actual cost depends on your vehicle, location, and labor rates.

FRDEESPT

See also: Russian version · NationStat