OBD Guide
ENFRDEESPT

P0082

Intake Valve Control Solenoid Circuit Low Bank 2

P0082 is an OBD-II diagnostic trouble code meaning: Intake Valve Control Solenoid Circuit Low Bank 2. Common causes: open or short circuit in vvt solenoid wiring, faulty variable valve timing solenoid. Estimated repair cost: $56–167.

Severity
⚠️ Medium
Can you drive?
Limited driving only, diagnose soon
Approx. repair cost
$56–167 (est.)

Symptoms

  • Unstable idle speed
  • Reduced engine power
  • Increased fuel consumption
  • Difficulty starting the engine
  • Check Engine Light on Dashboard
  • Rough engine idle

Causes

  • Open or short circuit in VVT solenoid wiring
  • Faulty variable valve timing solenoid
  • Oxidized or damaged connectors
  • Low voltage in the on-board network
  • Faulty Engine Control Module (ECM)
  • Contaminated engine oil or incorrect viscosity

How to Fix

  1. Check the level and condition of the engine oil, replace if necessary
  2. Visually inspect the bank 2 VVT solenoid wiring and connectors
  3. Measure the voltage at the solenoid connector with the engine running.
  4. Check the solenoid resistance with a multimeter
  5. Clean the connector contacts from oxides
  6. Replace VVT solenoid if necessary
  7. Check and repair damaged wiring
  8. Clear error memory and test drive

Related codes

P0081P0083P0084P0020P0021P0025

Error P0082 by Vehicle Brand

AcuraAudiBAICBMWBYDBuickCadillacChanganCheryChevroletChryslerCitroenDodgeDongfengExeedFAWFordForthingFotonGACGMGMCGeelyGreat WallHavalHondaHongqiHyundaiInfinitiJACJaecooJaguarJeepJetourKaiyiKiaLadaLexusLi AutoLifanLincolnLivanMazdaMercedes-BenzMercuryMitsubishiNIONissanOldsmobileOmodaOpelPeugeotPlymouthPontiacRenaultSWMSaturnSkodaSkywellSubaruSuzukiTankToyotaVolkswagenVolvoVoyahXPengZeekrZotye

FAQ

What does the P0082 code mean?

P0082 is an OBD-II diagnostic trouble code that indicates: Intake Valve Control Solenoid Circuit Low Bank 2

What causes a P0082 error code?

The most common causes of P0082 include: Open or short circuit in VVT solenoid wiring; Faulty variable valve timing solenoid; Oxidized or damaged connectors; Low voltage in the on-board network.

How do I fix a P0082 diagnostic trouble code?

To fix P0082: Check the level and condition of the engine oil, replace if necessary. Visually inspect the bank 2 VVT solenoid wiring and connectors. Measure the voltage at the solenoid connector with the engine running.. For a complete diagnosis, use an OBD-II scanner.

Is it safe to drive with P0082?

Limited driving only, diagnose soon

How much does it cost to fix P0082?

The estimated repair cost for P0082 is $56–167. Actual cost depends on your vehicle, location, and labor rates.

FRDEESPT

See also: Russian version · NationStat