OBD Guide
ENFRDEESPT

P0610

Control Module Vehicle Options Error

P0610 is an OBD-II diagnostic trouble code meaning: Control Module Vehicle Options Error. Common causes: installing an ecu from another car without reprogramming, corruption of configuration data due to power failure during recording. Estimated repair cost: $33–111.

Severity
⚠️ Medium
Can you drive?
Limited driving only, diagnose soon
Approx. repair cost
$33–111 (est.)

Symptoms

  • The Check Engine light comes on
  • Incorrect operation of configuration-dependent systems
  • Failures after installing a used ECU
  • Incorrect behavior of automatic transmission or all-wheel drive
  • Problems with comfort and safety systems

Causes

  • Installing an ECU from another car without reprogramming
  • Corruption of configuration data due to power failure during recording
  • Incorrect ECU reprogramming
  • Resetting the ECU to factory settings without entering configuration data
  • Damage to non-volatile memory (EEPROM) of the ECU

How to Fix

  1. Read complete vehicle configuration data via dealer scanner
  2. Make sure that the ECU is designed for this model and configuration
  3. Reprogram the ECU with the correct configuration data
  4. When using a used ECU, perform full programming for the vehicle’s VIN
  5. Contact an authorized dealer if it is impossible to do the programming yourself.

Related codes

P0630P0631P0632P0633P0605

Error P0610 by Vehicle Brand

AcuraAudiBAICBMWBYDBuickCadillacChanganCheryChevroletChryslerCitroenDodgeDongfengExeedFAWFordForthingFotonGACGMGMCGeelyGreat WallHavalHondaHongqiHyundaiInfinitiJACJaecooJaguarJeepJetourKaiyiKiaLadaLexusLi AutoLifanLincolnLivanMazdaMercedes-BenzMercuryMitsubishiNIONissanOldsmobileOmodaOpelPeugeotPlymouthPontiacRenaultSWMSaturnSkodaSkywellSubaruSuzukiTankToyotaVolkswagenVolvoVoyahXPengZeekrZotye

FAQ

What does the P0610 code mean?

P0610 is an OBD-II diagnostic trouble code that indicates: Control Module Vehicle Options Error

What causes a P0610 error code?

The most common causes of P0610 include: Installing an ECU from another car without reprogramming; Corruption of configuration data due to power failure during recording; Incorrect ECU reprogramming; Resetting the ECU to factory settings without entering configuration data.

How do I fix a P0610 diagnostic trouble code?

To fix P0610: Read complete vehicle configuration data via dealer scanner. Make sure that the ECU is designed for this model and configuration. Reprogram the ECU with the correct configuration data. For a complete diagnosis, use an OBD-II scanner.

Is it safe to drive with P0610?

Limited driving only, diagnose soon

How much does it cost to fix P0610?

The estimated repair cost for P0610 is $33–111. Actual cost depends on your vehicle, location, and labor rates.

FRDEESPT

See also: Russian version · NationStat