OBD Guide
ENFRDEESPT

P062F

Internal Control Module EEPROM Error

P062F is an OBD-II diagnostic trouble code meaning: Internal Control Module EEPROM Error. Common causes: physical malfunction of the eeprom chip in the ecu, power surge damaging eeprom. Estimated repair cost: $33–556.

Severity
🔴 High
Can you drive?
Limited driving only, diagnose soon
Approx. repair cost
$33–556 (est.)

Symptoms

  • The Check Engine light comes on
  • Reset all adaptive ECU settings
  • Unstable engine operation when warming up
  • Increased fuel consumption
  • Possible loss of immobilizer or VIN settings

Causes

  • Physical malfunction of the EEPROM chip in the ECU
  • Power surge damaging EEPROM
  • Exceeding the number of write cycles (chip fatigue)
  • Incorrect ECU reprogramming procedure
  • Long-term storage at low temperatures or exposure to moisture

How to Fix

  1. Reset the error and check for recurrence - eliminate accidental failure
  2. Check the ECU supply voltage for stability
  3. Try to reprogram the ECU with original firmware
  4. Send the ECU to a specialized service to replace the EEPROM chip
  5. If repair is impossible, replace the ECU with VIN programming
  6. After replacement, perform all necessary initialization procedures

Related codes

P0604P0605P0618P0619P0630

Error P062F by Vehicle Brand

AcuraAudiBAICBMWBYDBuickCadillacChanganCheryChevroletChryslerCitroenDodgeDongfengExeedFAWFordForthingFotonGACGMGMCGeelyGreat WallHavalHondaHongqiHyundaiInfinitiJACJaecooJaguarJeepJetourKaiyiKiaLadaLexusLi AutoLifanLincolnLivanMazdaMercedes-BenzMercuryMitsubishiNIONissanOldsmobileOmodaOpelPeugeotPlymouthPontiacRenaultSWMSaturnSkodaSkywellSubaruSuzukiTankToyotaVolkswagenVolvoVoyahXPengZeekrZotye

FAQ

What does the P062F code mean?

P062F is an OBD-II diagnostic trouble code that indicates: Internal Control Module EEPROM Error

What causes a P062F error code?

The most common causes of P062F include: Physical malfunction of the EEPROM chip in the ECU; Power surge damaging EEPROM; Exceeding the number of write cycles (chip fatigue); Incorrect ECU reprogramming procedure.

How do I fix a P062F diagnostic trouble code?

To fix P062F: Reset the error and check for recurrence - eliminate accidental failure. Check the ECU supply voltage for stability. Try to reprogram the ECU with original firmware. For a complete diagnosis, use an OBD-II scanner.

Is it safe to drive with P062F?

Limited driving only, diagnose soon

How much does it cost to fix P062F?

The estimated repair cost for P062F is $33–556. Actual cost depends on your vehicle, location, and labor rates.

FRDEESPT

See also: Russian version · NationStat