OBD Guide
ENFRDEESPT

P06A7

Sensor Reference Voltage B Circuit Range/Performance

P06A7 is an OBD-II diagnostic trouble code meaning: Sensor Reference Voltage B Circuit Range/Performance. Common causes: oxidation or poor contact in the group b sensor connector, unstable sensor with changing internal resistance. Estimated repair cost: $6–56.

Severity
⚠️ Medium
Can you drive?
Limited driving only, diagnose soon
Approx. repair cost
$6–56 (est.)

Symptoms

  • Check Engine Light Is On
  • Intermittent failures in the operation of several sensors
  • Unstable engine speed
  • Short-term power failures
  • Intermittent errors of ABS, transmission or climate control (when connected to group B)

Causes

  • Oxidation or poor contact in the group B sensor connector
  • Unstable sensor with changing internal resistance
  • Damage to the insulation of the wire of the 5V line of group B
  • Moisture in the wiring harness
  • Microdefect in the ECU (rare)

How to Fix

  1. Read all codes and determine which sensors are included in group B according to the car diagram
  2. Inspect the connectors of group B sensors, clean from oxidation
  3. Perform a wiggle test on the harness with the engine running, observing the voltage.
  4. Measure the reference voltage with an oscilloscope over time
  5. Replace the sensor or restore the wiring if a faulty element is identified
  6. Reset codes, perform extended test drive

Related codes

P0651P0652P06A6P06A8P06A9

Error P06A7 by Vehicle Brand

AcuraAudiBAICBMWBYDBuickCadillacChanganCheryChevroletChryslerCitroenDodgeDongfengExeedFAWFordForthingFotonGACGMGMCGeelyGreat WallHavalHondaHongqiHyundaiInfinitiJACJaecooJaguarJeepJetourKaiyiKiaLadaLexusLi AutoLifanLincolnLivanMazdaMercedes-BenzMercuryMitsubishiNIONissanOldsmobileOmodaOpelPeugeotPlymouthPontiacRenaultSWMSaturnSkodaSkywellSubaruSuzukiTankToyotaVolkswagenVolvoVoyahXPengZeekrZotye

FAQ

What does the P06A7 code mean?

P06A7 is an OBD-II diagnostic trouble code that indicates: Sensor Reference Voltage B Circuit Range/Performance

What causes a P06A7 error code?

The most common causes of P06A7 include: Oxidation or poor contact in the group B sensor connector; Unstable sensor with changing internal resistance; Damage to the insulation of the wire of the 5V line of group B; Moisture in the wiring harness.

How do I fix a P06A7 diagnostic trouble code?

To fix P06A7: Read all codes and determine which sensors are included in group B according to the car diagram. Inspect the connectors of group B sensors, clean from oxidation. Perform a wiggle test on the harness with the engine running, observing the voltage.. For a complete diagnosis, use an OBD-II scanner.

Is it safe to drive with P06A7?

Limited driving only, diagnose soon

How much does it cost to fix P06A7?

The estimated repair cost for P06A7 is $6–56. Actual cost depends on your vehicle, location, and labor rates.

FRDEESPT

See also: Russian version · NationStat