OBD Guide

P05A5

Active Grille Air Shutter A Control Circuit Low

P05A5 is an OBD-II diagnostic trouble code meaning: Active Grille Air Shutter A Control Circuit Low. Common causes: short circuit of the actuator control wire to ground, high circuit resistance due to oxidized connectors or poor connections. Estimated repair cost: $22–222.

Severity
Low
Can you drive?
Do not drive — repair immediately
Approx. repair cost
$22–222 (est.)

Symptoms

  • Check Engine light is on
  • Blinds do not move or move with great force
  • Active blind system in emergency mode
  • Slight decrease in fuel efficiency
  • Slow engine warm-up in cold weather

Causes

  • Short circuit of the actuator control wire to ground
  • High circuit resistance due to oxidized connectors or poor connections
  • Power loss due to problems with the vehicle's on-board network
  • Internal short circuit in the actuator windings (short circuit to housing)
  • Insufficient power supply to the blinds control module

How to Fix

  1. Read error codes and check on-board power supply parameters (battery voltage)
  2. Inspect the connector and wiring of the actuator for damage and short circuits to the body
  3. Measure the voltage of the control circuit when the command is active and compare with the norm
  4. Check that the control wire is not shorted to ground using a multimeter
  5. Measure the insulation resistance of the actuator wiring relative to the body
  6. Replace the actuator if an internal short is detected
  7. Reset codes and check normal control circuit parameters

Related codes

Error P05A5 by Vehicle Brand

FAQ

What does the P05A5 code mean?

P05A5 is an OBD-II diagnostic trouble code that indicates: Active Grille Air Shutter A Control Circuit Low

What causes a P05A5 error code?

The most common causes of P05A5 include: Short circuit of the actuator control wire to ground; High circuit resistance due to oxidized connectors or poor connections; Power loss due to problems with the vehicle's on-board network; Internal short circuit in the actuator windings (short circuit to housing).

How do I fix a P05A5 diagnostic trouble code?

To fix P05A5: Read error codes and check on-board power supply parameters (battery voltage). Inspect the connector and wiring of the actuator for damage and short circuits to the body. Measure the voltage of the control circuit when the command is active and compare with the norm. For a complete diagnosis, use an OBD-II scanner.

Is it safe to drive with P05A5?

Do not drive — repair immediately

How much does it cost to fix P05A5?

The estimated repair cost for P05A5 is $22–222. Actual cost depends on your vehicle, location, and labor rates.

See also: Russian version · NationStat